Arrow

Fleet Management, Theft Recovery Tracking Device

ARROW

Highlights

  • Cellular options – Arrow C: CDMA 1xRTT 850/1900 or Arrow 2G: GPRS 850/900/1800/1900
  • Integrated cellular and GPS antenna
  • LED status indicators for GPS and network registration
  • Communication via SMS, UDP, Ack UDP
  • Over the air configuration and firmware update
  • Extended AT Command set for flexible and easy configuration
  • Up to 16 Polygon Geo-fences

Optional Features

  • Rechargeable Back up Battery
  • PiezoBuzzer
  • 3-Axis Accelerometer

For more information, contact: support@montage-systems.com

DESCRIPTION

The Arrow Tracker is a real-time vehicle tracking system designed for vehicle recovery, fleet management, and more.  Available in CDMA or GPRS options.

It’s RELIABLE

The ultra-thin yet extremely durable Arrow-2G is a high-performance cellular tracking device designed for vehicle tracking, lot management, theft recovery, or other fleet applications. With an integrated GPS receiver, the Arrow-2G includes a CDMA 1X modem for wireless data communication and nationwide coverage. The built in high performance antennas for both cellular radio and GPS receivers make installation easy.

It’s SIMPLE

No programming skills required: The Arrow comes with easy-to- configure application software. Reports can be triggered periodically or in response to events such as motion, speeding, harsh acceleration and braking, geo-fence violations, and battery status. Notifications can be sent for vehicle towing, battery removal, and more.

It’s FUNCTIONAL

The Arrow’s interfaces include a serial port for communication with terminals and devices, power, ground, four GPIO pins that can be used for dedicated ignition, relay, 1-wire driver ID functionality, and I/O.

Optional features include a built in 3-axis accelerometer for motion detection and monitoring driver behavior; an internal Lithium-Ion back up battery that allows for continuous operation (up to 5 hours when the device is disconnected from the main power); and a buzzer alert system for driver warnings.

SPECIFICATIONS

CELLULAR

GPRS option: 850/900/1800/1900 MHz GPRS
Integrated high sensitivity antenna
Auto register to packet network

CDMA option: 850/1900 MHz Dual band 1xRTT
Integrated high sensitivity antenna
Auto register to packet network

GPS

Channels: 56
Tracking Sensitivity: -162 dBm
Acquisition Sensitivity: -148 dBm
Location Accuracy: 2.5 CEP

ENVIRONMENTAL

Operation Temperature: -30°C to +75°C
Storage Temperature: -40°C to +85°C
Operation Humidity: 20% to 90% (non-condensing)
Storage Humidity: 10% to 95% RH(non-condensing)

ELECTRICAL

Operating Voltage: 7V – 28V
Power Consumption: 500 mW typical, 750 mW max (option)

INTERFACE CONNECTOR

I/O Connector: 8 Pin Male 3mm
PWR, GND
UART (RX/TX)
4 – GPIOs (Ignition, Relay, 1-Wire, I/O)

PHYSICAL

Dimensions: 91mm x 39.4mm x 15.7mm
Internal Cellular and GPS Antennas

APPROVALS

CDMA – Verizon (in process) and Sprint (pending)
GPRS – PTCRB, IC and CE
FCC 47 CFR Part 15, Part 22, and Part 24
PTCRB, IC and CE
RoHS2 and WEEE